Airworthiness Directives; Airbus Helicopters

DEPARTMENT OF TRANSPORTATION <SUBAGY>Federal Aviation Administration</SUBAGY> <CFR>14 CFR Part 39</CFR> <DEPDOC>[Docket No. FAA-2024-2411; Project Identifier MCAI-2023-00874-R]</DEPDOC> <RIN>RIN 2120-AA64</RIN> <SUBJECT>Airworthiness Directives; Airbus Helicopters</SUBJECT> <HD SOURCE="HED">AGENCY:</HD> Federal Aviation Administration (FAA), DOT. <HD SOURCE="HED">ACTION:</HD> Notice of proposed rulemaking (NPRM). <SUM> <HD SOURCE="HED">SUMMARY:</HD> The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus Helicopters Model SA330J helicopters. This proposed AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This proposed AD would require revising the existing maintenance records by incorporating new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference. The FAA is proposing this AD to address the unsafe condition on these products. </SUM> <DATES> <HD SOURCE="HED">DATES:</HD> The FAA must receive comments on this NPRM by December 9, 2024. </DATES> <HD SOURCE="HED">ADDRESSES:</HD> You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods: • <E T="03">Federal eRulemaking Portal:</E> Go to <E T="03">regulations.gov</E> . Follow the instructions for submitting comments. • <E T="03">Fax:</E> (202) 493-2251. • <E T="03">Mail:</E> U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. • <E T="03">Hand Delivery:</E> Deliver to Mail address above between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. <E T="03">AD Docket:</E> You may examine the AD docket at <E T="03">regulations.gov</E> under Docket No. FAA-2024-2411; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this NPRM, the EASA AD, any comments received, and other information. The street address for Docket Operations is listed above. <E T="03">Material Incorporated by Reference:</E> • For EASA material identified in this proposed AD, contact EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; phone: +49 221 8999 000; email: <E T="03">ADs@easa.europa.eu;</E> website: <E T="03">easa.europa.eu.</E> You may find the EASA material on the EASA website at <E T="03">ad.easa.europa.eu.</E> • You may view this material at the FAA, Office of the Regional Counsel, Southwest Region, 10101 Hillwood Parkway, Room 6N-321, Fort Worth, TX 76177. For information on the availability of this material at the FAA, call (817) 222-5110. The EASA material is also available at <E T="03">regulations.gov</E> under Docket No. FAA-2024-2411. <E T="03">Other Related Material:</E> For Airbus material identified in this proposed AD, contact Airbus Helicopters, 2701 North Forum Drive, Grand Prairie, TX 75052; phone: (972) 641-0000 or (800) 232-0323; fax: (972) 641-3775; website: <E T="03">airbus.com/en/products-services/helicopters/hcare-services/airbusworld.</E> <FURINF> <HD SOURCE="HED">FOR FURTHER INFORMATION CONTACT:</HD> Adam Hein, Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; phone: (316) 946-4116; email: <E T="03">Adam.Hein@faa.gov.</E> </FURINF> <SUPLINF> <HD SOURCE="HED">SUPPLEMENTARY INFORMATION:</HD> <HD SOURCE="HD1">Comments Invited</HD> The FAA invites you to send any written relevant data, views, or arguments about this proposal. Send your comments to an address listed under <E T="02">ADDRESSES</E> . Include “Docket No. FAA-2024-2411; Project Identifier MCAI-2023-00874-R” at the beginning of your comments. The most helpful comments reference a specific portion of the proposal, explain the reason for any recommended change, and include supporting data. The FAA will consider all comments received by the closing date and may amend this proposal because of those comments. Except for Confidential Business Information (CBI) as described in the following paragraph, and other information as described in 14 CFR 11.35, the FAA will post all comments received, without change, to <E T="03">regulations.gov,</E> including any personal information you provide. The agency will also post a report summarizing each substantive verbal contact received about this NPRM. <HD SOURCE="HD1">Confidential Business Information</HD> CBI is commercial or financial information that is both customarily and actually treated as private by its owner. Under the Freedom of Information Act (FOIA) (5 U.S.C. 552), CBI is exempt from public disclosure. If your comments responsive to this NPRM contain commercial or financial information that is customarily treated as private, that you actually treat as private, and that is relevant or responsive to this NPRM, it is important that you clearly designate the submitted comments as CBI. Please mark each page of your submission containing CBI as “PROPIN.” The FAA will treat such marked submissions as confidential under the FOIA, and they will not be placed in the public docket of this NPRM. Submissions containing CBI should be sent to Adam Hein, Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; phone: (316) 946-4116; email: <E T="03">Adam.Hein@faa.gov.</E> Any commentary that the FAA receives which is not specifically designated as CBI will be placed in the public docket for this rulemaking. <HD SOURCE="HD1">Background</HD> EASA, which is the Technical Agent for the Member States of the European Union, has issued EASA AD 2023-0146, dated July 14, 2023 (EASA AD 2023-0146), to correct an unsafe condition on Airbus Helicopters Model SA 330 J helicopters. EASA advises that airworthiness limitations and certification maintenance instructions are identified as mandatory for continued airworthiness and that Revision 7 of SA 330 J Maintenance Program—PUMA 330 J Airworthiness Limitations 5.99, Edition 2, date code 06-22, has been issued to specify all service life limits and maintenance tasks for SA 330 J helicopters and separate the airworthiness limitations from the Master Servicing Recommendations Manual (P.R.E.). According to EASA, failure to accomplish these instructions could result in an unsafe condition. You may examine EASA AD 2023-0146 in the AD docket at <E T="03">regulations.gov</E> under Docket No. FAA-2024-2411. <HD SOURCE="HD1">Material Incorporated by Reference Under 1 CFR Part 51</HD> The FAA reviewed EASA AD 2023-0146, which requires replacing components before exceeding their life limits and accomplishing maintenance tasks within thresholds and intervals specified in the ALS as defined within. Depending on the results of the maintenance tasks, EASA AD 2023-0146 requires accomplishing corrective action(s) or contacting AH [Airbus Helicopters] for approved instructions and accomplishing those instructions. EASA AD 2023-0146 also requires revising the Aircraft Maintenance Programme (AMP) by incorporating the limitations, tasks, and associated thresholds and intervals described in the specified ALS, as applicable. Revising the AMP constitutes terminating action for the requirement to record accomplishment of the actions of replacing components before exceeding their life limits and accomplishing maintenance tasks within thresholds and intervals specified in the applicable ALS as required by EASA AD 2023-0146 for demonstration of AD compliance on a continued basis. This material is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in the <E T="02">ADDRESSES</E> section. <HD SOURCE="HD1">Other Related Material</HD> The FAA also reviewed Airbus Puma 330 J Maintenance Program—Airworthiness Limitations 5.99, Edition 2, Revision 7, date code 6-22, approved May 25, 2021. This material specifies airworthiness limitations, tasks, and associated thresholds and intervals for various parts. Revision 7 of this material incorporates a modification of the task following an improvement of the Kevlar protection on the fan bearing and the protective grid. <HD SOURCE="HD1">FAA's Determination</HD> These products have been approved by the aviation authority of another country and are approved for operation in the United States. Pursuant to the FAA's bilateral agreement with this State of Design Authority, it has notified the FAA of the unsafe condition described in its AD referenced above. The FAA is issuing this NPRM after determining that the unsafe condition described previously is likely to exist or develop on other products of the same type design. <HD SOURCE="HD1">Proposed AD Requirements in This NPRM</HD> This proposed AD would require revising the existing maintenance records by incorporating new or more restrictive actions and associated thresholds and intervals, including any life limits, specified in EASA AD 2023-0146, described previously, as incorporated by reference, except for any differences identified as exceptions in the regulatory text of this proposed AD and except as discussed under “Differences Between this Proposed AD and the EASA AD.” <HD SOURCE="HD1">Explanation of Required Compliance Information</HD> In the FAA's ongoing efforts to improve the efficiency of the AD process, the FAA developed a process to use some civil aviation authority (CAA) ADs as the primary source of information for compliance with requirements for corresponding FAA ADs. The FAA has been coordinating this process with manufacturers and CAAs. As a result, the FAA proposes to incorporate EASA AD 2023-0146 by reference in the FAA final rule. This proposed AD would, therefore, require compliance with EASA AD 2023-0146 in its entire ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Preview showing 10k of 20k characters. Full document text is stored and available for version comparison. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━