Energy Conservation Program: Energy Conservation Standards for Conventional Cooking Tops

DEPARTMENT OF ENERGY <CFR>10 CFR Part 430</CFR> <DEPDOC>[EERE-2025-BT-STD-0011]</DEPDOC> <RIN>RIN 1904-AF81</RIN> <SUBJECT>Energy Conservation Program: Energy Conservation Standards for Conventional Cooking Tops</SUBJECT> <HD SOURCE="HED">AGENCY:</HD> Office of Energy Efficiency and Renewable Energy, Department of Energy (DOE). <HD SOURCE="HED">ACTION:</HD> Proposed rule; request for comments. <SUM> <HD SOURCE="HED">SUMMARY:</HD> DOE is proposing to rescind the amended design requirements for conventional cooking tops. This will return the design requirements for conventional cooking tops to the standards for kitchen ranges and ovens set by Congress: Gas kitchen ranges and ovens having an electrical supply cord shall not be equipped with a constant burning pilot for products manufactured on or after January 1, 1990. </SUM> <EFFDATE> <HD SOURCE="HED">DATES:</HD> <E T="03">Comments:</E> Comments must be received on or before July 15, 2025. <E T="03">Meeting:</E> DOE will hold a webinar on Thursday, May 29, 2025, from 1 to 4 p.m. See section III, “Public Participation,” for webinar registration information, participant instructions, and information about the capabilities available to webinar participants. </EFFDATE> <HD SOURCE="HED">ADDRESSES:</HD> Interested persons are encouraged to submit comments using the Federal eRulemaking Portal at <E T="03">www.regulations.gov</E> under docket number EERE-2025-BT-STD-0011. Follow the instructions for submitting comments. Alternatively, interested persons may submit comments, identified by docket number EERE-2025-BT-STD-0011, by any of the following methods: (1) <E T="03">Email: Cooktops2025STD0011@ee.doe.gov.</E> Include the docket number EERE-2025-BT-STD-0011 in the subject line of the message. Submit electronic comments in WordPerfect, Microsoft Word, PDF, or ASCII file format, and avoid the use of special characters or any form of encryption. (2) <E T="03">Postal Mail:</E> Appliance and Equipment Standards Program, U.S. Department of Energy, Building Technologies Office, Mailstop EE-5B, 1000 Independence Avenue SW, Washington, DC 20585-0121. Telephone: (202) 287-1445. If possible, please submit all items on a compact disc (“CD”), in which case it is not necessary to include printed copies. (3) <E T="03">Hand Delivery/Courier:</E> Appliance and Equipment Standards Program, U.S. Department of Energy, Building Technologies Office, 1000 Independence Avenue SW, Washington, DC 20585-0121. Telephone: (202) 287- 1445. If possible, please submit all items on a CD, in which case it is not necessary to include printed copies. No telefacsimiles (“faxes”) will be accepted. For detailed instructions on submitting comments and additional information on this process, see section III, Public Participation, of this document. <E T="03">Docket:</E> The docket for this proposed rulemaking, which includes <E T="04">Federal Register</E> notices, public meeting attendee lists and transcripts (if one is held), comments, and other supporting documents and materials, is available for review at <E T="03">www.regulations.gov.</E> All documents in the docket are listed in the <E T="03">www.regulations.gov</E> index. However, not all documents listed in the index may be publicly available, such as information that is exempt from public disclosure. The docket web page can be found at <E T="03">www.regulations.gov/docket/EERE-2025-BT-STD-0011.</E> The docket web page contains instructions on how to access all documents, including public comments, in the docket, as well as a summary of the rulemaking. See section, “Public Participation,” for further information on how to submit comments through <E T="03">www.regulations.gov.</E> <FURINF> <HD SOURCE="HED">FOR FURTHER INFORMATION CONTACT:</HD> Mr. David Taggart, U.S. Department of Energy, Office of the General Counsel, GC-1, 1000 Independence Avenue SW, Washington, DC 20585-0121. Telephone: (202) 586-5281. Email: <E T="03">DOEGeneralCounsel@hq.doe.gov.</E> For further information on how to submit a comment or review other public comments and the docket contact the Appliance and Equipment Standards Program staff at (202) 287-1445 or by email: <E T="03">ApplianceStandardsQuestions@ee.doe.gov.</E> </FURINF> <SUPLINF> <HD SOURCE="HED">SUPPLEMENTARY INFORMATION:</HD> <HD SOURCE="HD1">Table of Contents</HD> <EXTRACT> <FP SOURCE="FP-2">I. General Discussion</FP> <FP SOURCE="FP-2">II. Procedural Issues and Regulatory Review</FP> <FP SOURCE="FP1-2">A. Review Under Executive Order 12866</FP> <FP SOURCE="FP1-2">B. Review Under the Regulatory Flexibility Act</FP> <FP SOURCE="FP1-2">C. Review Under the Paperwork Reduction Act</FP> <FP SOURCE="FP1-2">D. Review Under the National Environmental Policy Act of 1969</FP> <FP SOURCE="FP1-2">E. Review Under Executive Order 13132</FP> <FP SOURCE="FP1-2">F. Review Under Executive Order 12988</FP> <FP SOURCE="FP1-2">G. Review Under the Unfunded Mandates Reform Act</FP> <FP SOURCE="FP1-2">H. Review Under the Treasury and General Government Appropriations Act, 1999</FP> <FP SOURCE="FP1-2">I. Review Under Executive Order 12630</FP> <FP SOURCE="FP1-2">J. Review Under the Treasury and General Government Appropriations Act, 2001</FP> <FP SOURCE="FP1-2">K. Review Under Executive Order 13211</FP> <FP SOURCE="FP1-2">L. Review Under the Information Quality Bulletin for Peer Review</FP> <FP SOURCE="FP1-2">M. Review Under Additional Executive Orders and Presidential Memoranda</FP> <FP SOURCE="FP-2">III. Public Participation</FP> <FP SOURCE="FP1-2">A. Participation in Webinar</FP> <FP SOURCE="FP1-2">B. Procedure for Submitting Prepared General Statements for Distribution</FP> <FP SOURCE="FP1-2">C. Conduct of Webinar</FP> <FP SOURCE="FP1-2">D. Submission of Comments</FP> <FP SOURCE="FP-2">IV. Approval of the Office of the Secretary</FP> </EXTRACT> <HD SOURCE="HD1">I. General Discussion</HD> DOE is proposing to rescind the amended design requirements for conventional cooking tops, codified in 10 CFR 430.32(j)(1)(ii). For gas ranges and ovens, including conventional cooking tops, “manufactured on or after January 1, 1990,” Congress has set design requirements that “gas kitchen ranges and ovens having an electrical supply cord shall not be equipped with a constant burning pilot light.” (42 U.S.C. 6295(h)) DOE proposes to rescind the regulatory design requirements for conventional cooking tops manufactured on or after January 1, 1990, and seeks comment on all aspects of that proposal. The rescission will return the energy conservation standards to those in 6295(h)(1). The National Appliance Energy Conservation Act of 1987 (NAECA), Public Law 100-12, amended EPCA to establish prescriptive standards and design requirements for gas cooking products, requiring gas ranges and ovens with an electrical supply cord that are manufactured on or after January 1, 1990, not to be equipped with a constant burning pilot light. (42 U.S.C. 6295(h)(1)) NAECA also directed DOE to conduct two cycles of rulemakings to determine if more stringent or additional standards were justified for kitchen ranges and ovens. (42 U.S.C. 6295(h)(2)) NAECA did not specifically direct DOE to conduct additional cycles of rulemakings to determine whether the design requirements prescribed therein should also be amended. DOE is proposing to rescind the design requirements in its regulations to return the design requirements for conventional cooking tops to those prescribed by Congress. DOE is proposing to rescind these regulations for multiple independent reasons, including but not limited to the following. The design requirements are not economically justifiable. Furthermore, the Secretary is proposing a new policy to reduce regulatory burden wherever possible. Unless a regulatory standard is required by statute, the Secretary proposes eliminating that requirement. These design requirements are not necessary to fulfill DOE's statutory mission. These design requirements are not designed to achieve a maximum reduction in energy efficiency or use because the Secretary has tentatively determined that the portions of the current regulations that deviate from 6295 are not economically justified, and that they are inconsistent with the policy of maximally reducing regulatory burdens. See 42 U.S.C. 6295(p)(1). These are the same reasons that DOE is considering the change of position that is contemplated by this proposed rule. DOE seeks comments on any reason to rescind or not rescind these regulations. <HD SOURCE="HD1">II. Procedural Issues and Regulatory Review</HD> <HD SOURCE="HD2">A. Review Under Executive Order 12866</HD> Executive Order (E.O.) 12866, “Regulatory Planning and Review,” requires agencies, to the extent permitted by law, to (1) propose or adopt a regulation only upon a reasoned determination that its benefits justify its costs; (2) tailor regulations to impose the least burden on society, consistent with obtaining regulatory objectives, taking into account, among other things, and to the extent practicable, the costs of cumulative regulations; (3) select, in choosing among alternative regulatory approaches, those approaches that maximize net benefits; (4) to the extent feasible, specify performance objectives, rather than specifying the behavior or manner of compliance that regulated entities must adopt; and (5) identify and assess available alternatives to direct regulation, including providing economic incentives to encourage the desired behavior, such as user fees or marketable permits, or providing information upon which choices can be made by the public. <HD SOURCE="HD2">B. Review Under the Regulatory Flexibility Act</HD> The Regulatory Flexibility Act (5 U.S.C. 601 <E T="03">et seq.</E> ) requires preparation of an initial regulatory flexibility analysis (IRFA) and a final regulatory flexibility ana ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Preview showing 10k of 34k characters. Full document text is stored and available for version comparison. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━