Airworthiness Directives; Airbus SAS Airplanes

<RULE> DEPARTMENT OF TRANSPORTATION <SUBAGY>Federal Aviation Administration</SUBAGY> <CFR>14 CFR Part 39</CFR> <DEPDOC>[Docket No. FAA-2025-0205; Project Identifier MCAI-2024-00537-T; Amendment 39-23037; AD 2025-10-03]</DEPDOC> <RIN>RIN 2120-AA64</RIN> <SUBJECT>Airworthiness Directives; Airbus SAS Airplanes</SUBJECT> <HD SOURCE="HED">AGENCY:</HD> Federal Aviation Administration (FAA), DOT. <HD SOURCE="HED">ACTION:</HD> Final rule. <SUM> <HD SOURCE="HED">SUMMARY:</HD> The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A350-941 and -1041 airplanes. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products. </SUM> <EFFDATE> <HD SOURCE="HED">DATES:</HD> This AD is effective June 26, 2025. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of June 26, 2025. </EFFDATE> <HD SOURCE="HED">ADDRESSES:</HD> <E T="03">AD Docket:</E> You may examine the AD docket at regulations.gov under Docket No. FAA-2025-0205; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, the mandatory continuing airworthiness information (MCAI), any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. <E T="03">Material Incorporated by Reference:</E> • For EASA material identified in this AD, contact EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 8999 000; email <E T="03">ADs@easa.europa.eu.</E> You may find this material on the EASA website at <E T="03">ad.easa.europa.eu.</E> • You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available at <E T="03">regulations.gov</E> under Docket No. FAA-2025-0205. <FURINF> <HD SOURCE="HED">FOR FURTHER INFORMATION CONTACT:</HD> Dan Rodina, Aviation Safety Engineer, FAA, 2200 South 216th St., Des Moines, WA 98198; phone 206-231-3225; email <E T="03">Dan.Rodina@faa.gov.</E> </FURINF> <SUPLINF> <HD SOURCE="HED">SUPPLEMENTARY INFORMATION:</HD> <HD SOURCE="HD1">Background</HD> The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain Airbus SAS Model A350-941 and -1041 airplanes. The NPRM was published in the <E T="04">Federal Register</E> on February 19, 2025 (90 FR 9881). The NPRM was prompted by AD 2024-0180, dated September 17, 2024, issued by EASA, which is the Technical Agent for the Member States of the European Union (EASA AD 2024-0180) (also referred to as the MCAI). The MCAI states that new or more restrictive airworthiness limitations have been developed. In the NPRM, the FAA proposed to require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in EASA AD 2024-0180. The FAA also proposed to terminate the limitations required by paragraph (j) of AD 2024-01-05 for the tasks identified in the material referenced in EASA AD 2024-0180 only. The FAA is issuing this AD to address the potential of ignition sources inside fuel tanks, which, in combination with flammable fuel vapors, could result in a fuel tank explosion and consequent loss of the airplane. You may examine the MCAI in the AD docket at <E T="03">regulations.gov</E> under Docket No. FAA-2025-0205. <HD SOURCE="HD1">Discussion of Final Airworthiness Directive</HD> <HD SOURCE="HD1">Comments</HD> The FAA received comments from two commenters including Air Line Pilots Association, International (ALPA), and an individual who supported the NPRM without change. <HD SOURCE="HD1">Conclusion</HD> These products have been approved by the civil aviation authority of another country and are approved for operation in the United States. Pursuant to the FAA's bilateral agreement with this State of Design Authority, that authority has notified the FAA of the unsafe condition described in the MCAI referenced above. The FAA reviewed the relevant data, considered any comments received, and determined that air safety requires adopting this AD as proposed. Accordingly, the FAA is issuing this AD to address the unsafe condition on this product. Except for minor editorial changes, this AD is adopted as proposed in the NPRM. None of the changes will increase the economic burden on any operator. <HD SOURCE="HD1">Material Incorporated by Reference Under 1 CFR Part 51</HD> The FAA reviewed EASA AD 2024-0180. This material specifies new or more restrictive airworthiness limitations for fuel tank ignition prevention and fuel tank flammability reduction that include revising a certain Critical Design Configuration Control Limitation (CDCCL) to include the additional dimensional values for fuel pumps and existing O-rings in the auxiliary power unit (APU) pump. This material is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in the <E T="02">ADDRESSES</E> section. <HD SOURCE="HD1">Costs of Compliance</HD> The FAA estimates that this AD affects 33 airplanes of U.S. registry. The FAA estimates the following costs to comply with this AD: The FAA has determined that revising the existing maintenance or inspection program takes an average of 90 work-hours per operator, although the agency recognizes that this number may vary from operator to operator. Since operators incorporate maintenance or inspection program changes for their affected fleet(s), the FAA has determined that a per-operator estimate is more accurate than a per-airplane estimate. Therefore, the agency estimates the average total cost per operator to be $7,650 (90 work-hours × $85 per work-hour). <HD SOURCE="HD1">Authority for This Rulemaking</HD> Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII: Aviation Programs, describes in more detail the scope of the Agency's authority. The FAA is issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701: General requirements. Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action. <HD SOURCE="HD1">Regulatory Findings</HD> This AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government. For the reasons discussed above, I certify that this AD: (1) Is not a “significant regulatory action” under Executive Order 12866, (2) Will not affect intrastate aviation in Alaska, and (3) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act. <LSTSUB> <HD SOURCE="HED">List of Subjects in 14 CFR Part 39</HD> Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety. </LSTSUB> <HD SOURCE="HD1">The Amendment</HD> Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows: <HD SOURCE="HED">PART 39—AIRWORTHINESS DIRECTIVES</HD> <REGTEXT TITLE="14" PART="39"> 1. The authority citation for part 39 continues to read as follows: <HD SOURCE="HED">Authority:</HD> 49 U.S.C. 106(g), 40113, 44701. </REGTEXT> <SECTION> <SECTNO>§ 39.13 </SECTNO> <SUBJECT>[Amended] </SUBJECT> </SECTION> <REGTEXT TITLE="14" PART="39"> 2. The FAA amends § 39.13 by adding the following new airworthiness directive: <EXTRACT> <FP SOURCE="FP-2"> <E T="04">2025-10-03 Airbus SAS:</E> Amendment 39-23037; Docket No. FAA-2025-0205; Project Identifier MCAI-2024-00537-T. </FP> <HD SOURCE="HD1">(a) Effective Date</HD> This airworthiness directive (AD) is effective June 26, 2025. <HD SOURCE="HD1">(b) Affected ADs</HD> This AD affects AD 2024-01-05, Amendment 39-22656 (89 FR 6420, February 1, 2024) (AD 2024-01-05). <HD SOURCE="HD1">(c) Applicability</HD> This AD applies to Airbus SAS Model A350-941 and -1041 airplanes, certificated in any category, with an original airworthiness certificate or original export certificate of airworthiness issued on or before July 1, 2024. <HD SOURCE="HD1">(d) Subject</HD> Air Transport Association (ATA) of America Code 05, Time Limits/Maintenance Checks. <HD SOURCE="HD1">(e) Unsafe Condition</HD> This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. The FAA is issuing this AD to address the potential of ignition sources inside fuel tanks. The unsafe condition, if not addressed, could result in a fuel tank explosion and c ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Preview showing 10k of 15k characters. Full document text is stored and available for version comparison. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━