Operator MUST NOT inspect side

Source Text

For each T/R blade marked with an “X,” within 25 hours time-in-service after accomplishing the actions required by paragraph (g)(1)(ii)(B) of this AD and thereafter within intervals not to exceed 25 hours time-in-service, clean each abrasion strip by following the Accomplishment Instructions, part III, paragraph 2, of ASB 429-24-63. Using a flashlight, visually inspect each side of the T/R blade abrasion strip for a chordwise crack in the area shown in Figure 1 of ASB 429-24-63. Figure 2 of ASB